Are you thinking of getting your goalie mask painted? This article is to inform goalies and trainers of safety, pricing, turnaround time and other information before deciding if you would like custom airbrushed artwork on your goalie mask. This article also applies to airbrushing helmets and other head gear.
CSA Standards and Certification
Unfortunately when paint is applied to a mask it is no longer CSA certified. This means that if you are in a league that requires all gear to be CSA certified the officials could prevent you from playing with your airbrushed mask. If you would like to keep CSA status and have your mask airbrushed you have two options.
Contact the manufacturer of the mask you have or intend to buy. They may either issue you new stickers to apply after airbrushing or, refer you to one of their “Certified” airbrushers. The problem with the latter being you will have to ship your mask to wherever the Certified artist is, as well as they tend to be on the expensive side.
Pricing
The first and most common question I get is “How much?”. There’s a basic cost of stripping down the mask, sanding it and preparing it for paint. Artwork costs can vary greatly depending on what a customer would like for artwork. This is the reason I cant give an answer straight up until I know what is involved for artwork. Is their logo(s)? names? numbers? Is the visuals simple like a happy face, or really complex like a dragon winding through castles with little nomes running around? If you would like a cost please give me as much details as possible and I will be more than happy to give you a price. If you ask for other items to be included after I issue a price you will be charged for it according to complexity. To give you a general range of pricing the average custom airbrush job on a goalie mask costs around 500.00 to 600.00. Again this can vary depending on the complexity of the requested artwork. For an accurate quote please contact me here with details of requested artwork, the type of mask, and if it is new or used.
Waiver
I have no history or knowledge of the mask brought to me. I don’t know if it has been previously cracked or weakened in some manner which is possible without it being visible. Therefor all customers must sign a waiver before work begins. The waiver releases myself from any liabilty should a goalie take a blow to the mask resulting in injury or death.
Used Masks
If you have a used mask you want painted there’s a few things you need to consider.
How used is the mask?. Does it have more than a few minor chips? If it does you may want to consider getting a new mask before going to the expense of custom artwork. If you do want to go ahead with painting a used mask and it only has minor superficial chips and scratches they can be repaired.
Paint and Klear Kote
The paint I use is Auto Air airbrush colors. They are water soluble and non-toxic. The airbrushed artwork is sealed with auto grade Klear Kote. Two coats are applied and then lightly sanded before a third coat is applied.
Junior Goalie Masks
Unfortunately I can not airbrush on junior goalie masks other than as a novelty decorative item to be displayed as a commerative piece only (no game or practice action). The reason for this is most junior masks are made of plastic which can potentially break down when coming in contact with paint and Klear Kote.
Turnaround Time
Generally masks are turned around in about 3 to 4 weeks depending on how busy I am.
The Goalie Archives are 8 Artworks and Legendary stories of Goalies who used knowledge, enginuity, and skill to achieve excellence as Goalies and Team Players. This is the Art and Legends of these Goalies.
In the 80’s there was a goalie who was an amazing Artist. A flick of the wrist, a flash of the arm, and the Artist would create flowing color, spontaneous splashes, graceful lines, and desperate splashes of pigment. The goalies creative approach was often outside the boundaries of logic, and the freestyle techniques employed often drew odd looks and scathing reviews from the critics. But undetered by the pessimists the goalie pursued the craft with focused intensity. Everyone watched in awe as the Artist painted a picture not of perfection, but rather of passion. When the masterpiece was finally complete there the goalie stood, exhausted, drenched in sweat, and without satisfaction… the shutout was complete.
Hockey Art, The Goalie Archives
| 
collectible, goalie, goaltender, hockey archives, Hockey Art, Hockey Artist, hockey collectible, hockey legend, hockey legends, hockey posters, hockey prints, ice hockey, Original Paintings
Well I’m a little late but here’s the first and hopefully not my last post on the lonely world of hockey art. So lets start my introduction with some of my latest hockey art. I thought a skull series would be fun and unique…kinda like hell on ice. Not a team you’d like to play against. So here’s the first two…hope you like them.The plan for these is to turn them into a series of limited edition hand pulled silkscreen posters and t-shirts.
The Gatekeeper
The Big Idea
The most requests I get are to airbrush goalie masks. I love doing them because of my keen interest in hockey. So what’s involved in creating an airbrushed work of art on a 3-dimensial surface such as a goalie mask. Usually a customer will have a basic idea of what they want on their mask. We discuss the theme and I make suggestions as to what would fit best and where on the mask. Sometimes a customer will feel comfortable taking what we have discussed and giving me creative freedom to run with it. Other times a customer would like to see ough sketches.
The Mask
So we’ve established the big idea, now its time to prepare the mask. Firstly the mask hardware (cage and straps) need to be removed. Sometimes a customer will ask me to save the safety stickers. The customer or myself can do this, or at least try to do this by steaming the stickers off. The success of this all depends on 2 things, the first is what the sticker is made of. If it’s paper it is very difficult to keep intact. If it’s a plastic type material it is usually easier but can also strectch somewhat from the steam and pulling off from the glue. The second concern is what the sticker glue is made of. If it’s a water based glue it will dissolve and release more easily. If it’s an oil based glue it will be a little more stubborn but will usually warm up and release.
Surface Preparation
Now everything is removed and we need to prepare the surface of the mask and back plate. The first thing we need to do is “mask” or cover the inside of the mask and back plate to protect the padding during the entire process. This includes applying small pieces of masking tape inside the vent and strap holes. Next the mask needs to be sanded to remove the gloss or gel coat. This needs to be done so that the airbrushed paint properly adheres to the surface. This is a very important and time consuming process because not only the main surface needs to be sanded but also the inside edges of all of the vent holes and strap slots. Then the mask and back plate are cleaned with a degreaser to remove all residual dust and other loose material. Finally a base coat needs to be applied to the entire mask. This is usually done in black, white, or a combination of both depending what the overall design of the mask is.
A Blank Canvas
Finally we have a blank canvas to work with and its time to create our masterpiece. But hold on, the first thing we need to consider is what the design is so we can determine what method to approach the airbrushing. If the artwork requires a hard edge such as a logo or name then masking needs to be cut to prevent overspray, depending on the graphic this can be a meticulous process. If its very complex a vinyl cut of the shapes need to be printed out on a vinyl cutter. This is a material similiar to a sheet of letters that can be peeled of with a sticky backing and applied. After the area is airbrushed the masking is removed. The other method is freehand where there is no masking but the airbrushing has a softer edge and blends applied. Usually a design requires a combination of both methods. Sometimes the masking is hand held to save time and prevent airbrushing from bleeding under the masking. Now our airbrushed artwork is complete and we’re ready to re-assemble the mask right……wrong. Now we have to apply Klear Kote to protect the artwork.
Icing on the Cake
Similar to the shiny surface of a new car the mask needs to have several Klear Kotes applied to it. This not only protects the artwork but also brings out the colors and gives the airbrushing a “deeper” effect. After “curing” or hardening for several days the cage, straps, and stickers if any can be re-applied. As you can see there is much more involved in properly airbrushing a goalie mask than simply spraying on the artwork. All in all, the actual airbrushing of the artwork is approximately 50 to 60 per cent of the entire process from start to finish. You now have a colorful new mask thats gives you a boost of confidence in facing down opponents!
Authors Copyright Note: All content and writing of this article is copyright Cam Wilson, Hockeyartist.com, and Inferno Air Custom Airbrushing. Any use of this material in portion or its entireity without expressed written consent to the author is strictly prohibited.
Comments (0) 
Themocracy WordPress Themes